Setting up your CRx Scan (Formerly Handout Manager) Device for the First Time

When you first receive your CRx Scan (Formerly Handout Manager) device, use the following steps to secure it with a Personal Identification Number (PIN), connect to the Wi-Fi and then register to Pharmacy Manager.

  1. Remove the device from its packaging and press and hold the Power button on the right-hand side until the Android logo displays.

  2. A start up sequence takes approximately 45-60 seconds until the Device not compliant screen displays.

    Select Set screen lock.

  3. The Choose a screen lock screen displays, select PIN.

  4. On the Set a PIN screen, enter a PIN for the device, it must be a minimum of 6 digits.

    Note - Common PIN codes are not be permitted, for example, 123456.

  5. Select Next.

  6. The Re-enter your PIN screen displays, enter your PIN and then select Confirm.

  7. Verify the device connects to the Wi-Fi.

    Note - If the device does not connect to the Wi-Fi speak to your Cegedim Rx representative.
    If you have not yet set up your Zyxel Wi-Fi unit, see Zyxel Wi-Fi Installation for details.

  8. The desktop displays, select Handout Manager .

  9. The Welcome - This device isn't registered screen displays.

You can now register the device with Pharmacy Manager. See CRx Scan (Formerly Handout Manager) Settings for details.